Digital multimeter for professional users CAT. lll 1000 V

Description

• Professional multimeter for car and commercial vehicle electrics and electronics
• Automatic polarity display and optical signal for overload and acoustic signal for continuity test
• With measurement value storage
• With additional possibility to connect the clamp-on current probe STZ 01, 0...400 A or STZ 02, 0...1000 A.
• Specifications:
  • Direct voltage (DC): 0 to 1000 V
  • Alternating voltage (AC): 0 to 1000 V (40 Hz to 400 Hz)
  • Accuracy: Direct voltage (DC) -0.5% / Alternating voltage (AC) -0.75%
  • Direct current (DC): 0 to 10 A (20 A for 30 seconds) Alternating current (AC): 0 to 10 A (20 A for 30 seconds)
  • Resistance (Ohm): 0 to 40 MΩ Capacity: 0.01 nF to 100 uF Frequency: 0.5 Hz to 10 MHz
  • Operating cycle: 0.1% to 99.9% at 0.5 Hz to 500kHz (for pulse width > 2usec.)
  • Diode measurement: 2.5 V
  • Continuity test: Acoustic signal at < 10 Ω (response time < 1ms)
  • Dimensions: 40 mm x 92 mm x 172 mm
  • Weight: 386 g
  • Battery: 9 V block

Scope of delivery

• 1 multimeter
• 1 test lead set red/black

 

 

spare parts

• ET 331 (121347) fuse for MT 701, 400 mA/1000 V
• ET 332 (121348) fuse for MT 701, 11 A/1000 V
• ET 247 (120426) test lead set

 

Table

Testing capability	Range	Accuracy	Resolution
Direct voltage (DC)	0 mV...1000 V	± 0.5% + 2 dig.	0.1 mV
Alternating voltage (AC)	0 mV...1000 V	± 0.75% + 3 dig.	0.1 mV
	(40...400 Hz)
Direct current (DC)	0 µA...10 A	± 1.0% + 2 dig.	0.1 µA
Alternating current (AC)	0 µA...10 A	± 1.0% + 5 dig.	0.1 µA
Resistance	0...10 MOhm	± 0.5% + 3 dig.	0.1 Ohm
Capacity	0.01 nF...100 µF	± 2.5% + 10 dig.	1 pF
Frequency	0.5 Hz...10 MHz	± 0.02% + 2 dig.	0.001 Hz
Continuity test	X
Diode test	X
IEC 1010 CAT. lll	1000 V