Engine pressure-loss tester Kia

Description

• Suitable for Kia vehicles due to the special adapter combination
• Universally suitable for petrol and diesel engines in connection with further adapters
• Quick and easy diagnosis of each individual cylinder or combustion chamber
• The special pressure gauge allows a quick evaluation
• If the pointer is not in the green area, the measured pressure loss is not acceptable
• Before carrying out the test, the maximum permissible pressure loss of the engine is set (approx. 23%) by connecting it to the workshop's compressed air supply
• The OT 04 upper dead point gauge allows for the quick and precise determination of the top dead centre of the cylinder to be tested
• Simple application and operation
• Other vehicle or customer-specific set combinations on request

 

 

Scope of delivery

• 1 engine pressure loss tester with pressure control valve and precision pressure gauge NG 80 with stable rubber protection cap
• 1 test hose with quick coupling, length 1.00 m
• 1 adapter ZKD 21 for injector bore Ø 16.5 / Ø 7.5 (diesel engines)
• 1 adapter ZKD 23 for spark plug thread M10x1.25 (diesel engines)
• 1 adapter ZKD 24 for spark plug thread M10x1.25 (diesel engines)
• 1 adapter ZKD 25 for spark plug thread M10x1 (diesel engines)
• 1 adapter (70 mm) ZKS 01.1 for spark plug thread M14x1.25 and M18x1.5 (petrol engines)
• 1 adapter (200 mm) ET 37.3 for spark plug thread M14x1.25 (petrol engines)
• 1 adapter KPA 10 (200 mm; flexible), M14x1.25 (petrol engines)
• 1 OT 04 upper dead point gauge (Plexiglas cylinder, hose with quick coupling)