Fuel low pressure diagnostic kit 30 adapters

Description

• For quick, easy and professional testing and diagnosis of mechanical and electronic fuel injection systems
• Also suitable for almost all European and Asian vehicles with the following injection systems due to the special adapter combination: K-Jetronic, KE-Jetronic, L/LH-Jetronic, Motronic, MPI, HMPI, EFI, DIGIFANT, Mono-Jetronic, Opel-Multec, Weber CFI
• Can be used almost universally in combination with other adapters
• The intermediate, adjustable 3-way valve between the warm-up regulator and fuel distributor allows for the system and control pressure to be checked and the injection system to be tested for leaks
• With release valve for emptying the residual fuel
• Measurement range 0 … 10 bar / 0 … 140 psi, fine graduation 0.1 bar
• Precision pressure gauge NG 100 with robust rubber protection cap and mounting hook. Suitable for European and Asian vehicles. Other pressure gauge measurement ranges on request
• Optionally available with ISO calibration certificate
• All individual parts are available as spare parts
• High performance quality product made in Germany
• Extensive assortment of adapters as accessories.

Scope of delivery

• 1 pressure gauge NG 100, MB 0 … 10 bar / 0 … 140 psi
• 1 3-way valve
• 3 hoses of 0.25 m each, with quick coupling on both sides
• 30 DPAK adapter (coupling connection)
  • DPAK 1; M 4x1.5 (external thread, angle adapter)
  • DPAK 2; M12x1.5 (external thread, angle adapter)
  • DPAK 3; M8x1 (external thread)
  • DPAK 4; M12x1.5 (external thread)
  • DPAK 5; M12x1.5 (internal thread)
  • DPAK 6; M8x1 (internal thread)
  • DPAK 7; Ø 6 mm, Ø 8 mm (fuel hose, 2-piece)
  • DPAK 8; M10x1 (external thread)
  • DPAK 9; M10x1 (external thread, angle adapter)
  • DPAK 11; M8x1 (internal thread)
  • DPAK 12; M14x1.5 (internal thread)
  • DPAK 13; M14x1.5 (external thread)
  • DPAK 14; M8x1 (external thread, angle adapter)
  • DPAK 19; M16x1.5 (external thread)
  • DPAK 21; M10x1 (internal thread)
  • DPAK 22; 7/16"- 20UNF V6
  • DPAK 24; Plug connection, Ø 11 mm
  • DPAK 26; 7/16"-20UNF
  • DPAK 27; 7/16"-20UNF V6; (Internal thread, angle adapter)
  • DPAK 28; 7/16"-20UNF V6 (internal thread, angle adapter, rotatable with angle)
  • DPAK 29; VG 8 (internal thread, angle adapter, adapter with release pin)
  • DPAK 30; VG 8 (internal thread, adapter with release pin)
  • DPAK 31; Hose connector, Ø 8 mm, 2-piece
  • DPAK 32; M14x1.5 (internal thread, with sealing cap)
  • DPAK 34; Plug connection, Ø 8 mm, 2-piece
  • DPAK 35; Plug connection, Ø 14 mm; 2-piece
  • DPAK 36; M12x1.25 (external thread, hollow screw)
  • DPAK 37; M12x1.5 (external thread, hollow screw)
  • DPAK 38; M10x1 (external thread, hollow screw)
  • DPAK 39; M8x1 (external thread, hollow screw)
• 1 extension hose 1.00 m, quick coupling on both sides
• 1 release valve AVE 01 with drain hose
• Ships complete in a rugged plastic case

Equipment

• ET 366 ( 121382) extension hose, length 3.00 m (9.8 ft), fuel resistant, with quick coupling on both sides. Used to check fuel pressure while driving.

spare parts

• ET 104 (120508) gauge DS 100 mm with protective rubber cap and hook
• ET 136 (120590) three-way valve (connectable)
• ET 143 (120520) hose each end with coupling 0.25 m (9.8 in)
• ET 280 (121176) extension hose 1.00 m (3.3 ft)
• ET 719 (111765) extension hose 20 cm (7.9 in) with coupling and nipple DN 5
• AVE 02_LR (040780_1) drain valve for LR 180/4